Hoover U6049 User Manual download pdf (Page 10)

FIG. 1

FIG. 2

outside of cover and the cover is in proper

posit&on

the gasket before latching.

With the cleaner upright and the handle in the storage

position, turn on the motor briefly before lowering

handle into cleaning position. This insures that the

throw-away bag is inflated.

THE SECONDARY FILTER The secondary filter

protects the motor from dirt. Before installing a new

bag, check the filter. Dirt spilled in the bag housing

will accumulate on the filter and may restrict motor

performance. To clean filter, remove wire holder and

lift out filter. After new bag is installed, close bag

housing and set suction dial for cleaning tools. Plug

cleaner into electrical outlet, turn on, and tap filter

against opening below the suction dial. Disconnect

cleaner from electrical outlet, replace filter in bag

housing, and secure with wire holder.

THE NOZZLE HOSE The nozzle hose on the cleaner

carries the dirt from the nozzle to the throw-away bag.

If the hose becomes obstructed (which may happen if

the bag is overfilled), remove it and clear it. Remove

the hose end from the bottom of the bag housing.

Fig. 1. Turn cleaner over, remove bottom plate (see

Page 10) and lift hose connector from cleaner. Fig. 2.

Clean hose and reinsert it in the cleaner.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Hoover U6049 User Manual Page 10