Hoover U6049 User Manual download pdf (Page 8)

b. To wand Add a tool to the end of the wand

by fitting the button projection on the tool into

the opening on the wand. You will hear the

plastic spring latch snap and lock into place.

To release, press down on the spring latch and

remove.

4. Remove hose for floor use

When you are finished using the attachments, remove the hose.

To remove hose from cleaner, return the dial indicator to MAX position under

CARPET SUCTION, then turn hose connector counterclockwise and remove

hose.

Your cleaner is equipped with an interlock mechanism to prevent leaving the

dial indicator at the TOOL SUCTION area when cleaning carpet.

To clean tools

To clean the hose, wipe off dirt with a cloth, dampened with a liquid deter-

gent. Use a damp cloth to remove the detergent. Cleaning tools can be washed

in warm water with a detergent. Rinse and let dry before using.

Maintenance

Proper cafe of your cleaner, will insure operation

at peak performance.

Don’t pick up hard sharp objects

They may damage the hose and the throw away bag.

Take care of cord

Wind it loosely, on cover latch and knob on Suction

Control Dial, to avoid strain. Snap clip-on plug onto

cord. To remove cord, turn cover latch (See inset).

Don’t run cleaner over the cord

it may damage the

insulation. Never pull on the attachment cord to dis-

connect the plug from the electrical outlet. Grasp

the plug to prevent damage to the cord, plug prongs

or receptacle.

Disconnect cord from electrical outlet before at-

tempting to service cleaner in any manner.

THE BAG

THE FULL BAG INDICATOR The bag indicator,

“CHECK BAG” located on the front of the cleaner,

makes it convenient for you to know when the dis-

posable bag should be changed.

~--.

___._

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Hoover U6049 User Manual Page 8