Hoover U6049 User Manual download pdf (Page 12)

!

Replace agitator and latch it in

posi-

I

tion. (Fig. 4).

Make sure that large belt is in center

of pulley, and free of agitator mount-

ings and latch. Turn agitator by hand

to be sure that belt is in proper posi-

tion. (Fig. 5).

Replace bottom plate. (Fig. 6). Make

sure that clips enter into the recesses

on the cleaner bottom plate. Check

to see that latches are pushed back

and will not be covered by plate. (Fig.

6). Place plate in position and latch

securely. Turn agitator by hand to be

sure that belt is in proper position on

pulley.

1

Brushes

When brushes are worn and bristles do

not touch the edge of a card held across

the nozzle, they should be replaced.

(Fig. 1). Alwa

ys replace both brushes

at the same time to maintain cleaning

effectiveness.

I

/

TO REPLACE BRUSHES

Remove bottom plate, belt and agita-

tor following directions on Page 11.

Turn end plates (Fig. 2) of agitator in

opposite direction.

I

11

6

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments