Hoover S3083-030 User Manual download pdf (Page 6)

TO CONNECT AND REMOVE HOSE

To connect hose, insert hose into opening of cleaner

lining up the arrow on the hose with the dot on the

cleaner. Turn the hose clockwise until it lines up

with the bar on the cleaner and latch locks into

place.

When the hose is attached properly, the hose cord

plug will reach to the receptacle on the cleaner.

Insert the plug firmly and as deep into the

receptacle as possible.

To disconnect hose, depress latch away from hose

connection opening in cleaner. While holding latch,

turn the hose counterclockwise until the arrow

lines up with dot on the cleaner.

HOW TO CONNECT THE

‘POWERMATIC’ NOZZLE

1. Attach Powcrmatic nozzle to the end of the ex-

tension wand. Be sure the nozzle is locked in place.

To release, press down on the center of the white

plastic spring latch and remove nozzle.

2. Position cord in cord clips on extension wands.

3. To attach the hose and extension wands, rotate

the plastic latch ring to accept the button projec-

tion on the extension wands.

Push the handle over the wand so that the button

projection fits into the slot. Turn the outer ring on

the handle to lock the handle and wand in place.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Hoover S3083-030 User Manual Page 6