Hoover S3083-030 User Manual download pdf (Page 14)

Place a screwdriver under the belt as illus-

trated. Fig. 8.

8

Bracing the end of the screwdriver against

the end of the motor shaft, slide belt over

end of shaft. Fig. 9. Remove screwdriver.

Check to be sure belt is not twisted.

9

Rotate the agitator by hand to properly

align the belt on the motor shaft. Agitator

should rotate freely. Fig. 10.

IO

Replace agitator dirt seal. Place beveled

end toward front. Fig. 11.

11

Replace bottom plate by fitting the plate

over the lip at the front of the nozzle hous-

ing. Line up the slots over the wheels and

position holes in bottom plate over screw

mountings. Fig. 12. Replace screws.

12

13

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments