Hoover S3670 User Manual download pdf (Page 5)

Floor surface selector

Carpet or rug cleaning

When using the power nozzle for carpet and

rug cleaning, push the floor surface selector

button toward “ON” (D). This setting pro-

vides the suction and agitator action neces-

sary to deep clean carpets. The nozzle

adjusts automatically to various carpet pile

heights.

WindTunnel power

nozzle

Handle positions

The handle has two positions when used

with the power nozzle: upright and operating.

To lower handle to operating position, place

your foot firmly on the power nozzle and pull

handle back.

Check bag indicator

The indicator will show a red light as bag fills

with dirt. There are three conditions that will

cause the indicator to become completely red:

1. The bag is full; change the bag.

2. Very fine materials (such as powder) have

been picked up, clogging the bag pores;

change the bag, even if it is not full.

3. There is a blockage in the nozzle, hose, tools,

or at the bag opening; remove the blockage.

ON-OFF switch

After assembling cleaner, plug cord into elec-

trical outlet. Turn cleaner on by depressing

ON-OFF pedal (A). To turn cleaner off,

depress pedal again.

Note: Pedal opposite ON-OFF pedal is Cord

Rewind Pedal (B).

5

2-2

Polarized plug

To reduce the risk of electric shock, this

appliance has a polarized plug (one blade is

wider than the other). This plug will fit in a

polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified

electrician to install the proper outlet. Do not

change the plug in any way.

A

B

2-4

D

2-3

2-5

Hard surface floor cleaning

The power nozzle can be used for cleaning

hard surface floors such as wood, linoleum,

vinyl, asphalt and rubber tile, sealed cork,

concrete and terrazzo, as well as carpet.

To set the power nozzle for hard surface floor

cleaning, push the floor surface selector but-

ton toward “OFF” (E). This setting provides

suction and no agitator action. If you prefer,

you may use the hard floor tool to clean bare

floors.

You will find it particularly convenient when

cleaning lightweight area rugs to set the floor

surface selector button on “OFF” and contin-

ue cleaning the surrounding floor surfaces.

Note: The headlight will be ON in both the

“ON” and “OFF” floor surface modes

.

2-6

E

Note: Turn surface selector switch to the

"OFF" position before turning on canister.

1 2 3 4 5 6 7 8 9 10 ... 28 29

Comments to this Manuals

No comments