Hoover S3670 User Manual download pdf (Page 11)

11

3-21

3-23

3-22

B

E

C

A

B

A

Powered hand tool

Agitator brush roll

replacement

When agitator brush roll brushes are worn,

the brush roll should be replaced.

Ask for HOOVER part no. 48414088.

How to replace

Disconnect cleaner from electrical

outlet.

1. Remove tool from hose and turn it so bot-

tom faces up. Press the latches on either

side of tool and remove bottom plate (A).

2. Unscrew the two Philips screws and

remove belt guard (B).

3. Remove agitator including end plates (C)

and discard.

4. Inspect belt to ensure that it is in good

condition. If belt is cracked, gouged or bro-

ken, replace it (see following section).

5. Insert brush roll through belt and position

belt over gear teeth (D) on brush roll.

3-24

6. With curved ends down, slide end plates

(C) of brush roll into slots (E) on tool.

3-25

7. Replace belt guard (B) making sure not to

pinch brush bristles in guard.

Turn agitator, making sure it rotates freely.

Replace and tighten screws.

3-26

8. To replace bottom plate (A), insert the four

tabs on edge of bottom plate into slots on

front of tool.

Pivot bottom plate down and snap closed.

C

D

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Comments to this Manuals

No comments