Hoover WindTunnel UH70200 User Manual download pdf (Page 11)

4.18

4.16

4.16 Turn tool so bottom faces up. Rotate the

latches (A) on either side of tool.

4.17 Remove bottom plate (B).

4.18 Remove any debris and/ or hair from brushroll.

Replace bottom plate by aligning tabs along front

edge of tool. Rotate latches back into locked position.

POWERED HAND TOOL: How to Clean

(Tool varies per model)

4.17

4.19

4.20

4.21

Removing Lens

Press Handle Release Pedal and place Handle in

low position.

4.19 Using a Phillips screwdriver, remove (2) screws

as shown and lift off lens.

Installing Bulb

4.20 Pull old bulb straight out of socket. Push new

bulb straight into socket until locked in place.

Excessive force is not required.

Twisting or turning bulb not required.

Replacing Lens

4.21 Reposition lens and secure with screws.

Headlight:

What to Buy

This vacuum uses a

common automotive

lamp #906, 13 volt.

HOSE: How to Clean

4.15

CAUTION

! !

To reduce the risk of injury from moving parts, unplug vacuum before servicing.

4.15 To remove Hose for tool use, press the Hose Release Button (A) and pull

Hose end out.

Clear away debris or obstructions from Hose. Do not use sharp objects to clean

out hose as they can cause damage. To lock back into place, push Hose into

Hose Tube until you hear a click.

CAUTION

! !

To reduce the risk of injury from moving parts,

unplug vacuum before servicing.

HEADLIGHT: How to Replace

WARNING

! !

To reduce the risk of electrical shock, unplug

vacuum before cleaning or servicing.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 44 45

Comments to this Manuals

No comments

Hoover WindTunnel UH70200 User Manual Page 11

Comments to this Manuals

Related products and manuals for Vacuum cleaners Hoover WindTunnel UH70200