Hoover Vacuum Cleaner User Manual download pdf (Page 13)

4.28 With lettering on outside of belt, slide new belt

over motor shaft (metal rod) (E).

Push other end of belt through belt guide (F) and

over metal pulley*, then slip around area of brushroll

without bristles (G).

With belt in place, pull and slide brushroll into nozzle

making sure that the brushroll end caps are in the

correct orientation.

4.29 Reposition bottom plate, aligning the three

tabs along front edge of nozzle guard with the three

slots in nozzle. Rotate back into position. Slide red

lower latch to Lock position, and rotate red upper

latch clockwise to secure bottom plate.

*Models without “Suction Only Mode” do not have

the metal pulley

4.28

What to Buy: Belt

Use only genuine HOOVER

belts with your

vacuum.

When purchasing a new belt for models

with

Brushroll On/Off (Suction Only Mode), ask for

Flat Belt - HOOVER

part No. 562289001 or

AH20065.

When purchasing a new belt for models

without

Brushroll On/Off (Suction Only Mode), ask for

Stretch Belt - HOOVER

part No. 38528058 or

AH20080.

If desired, additional belts can be purchased at

Hoover.com or 1-800-944-9200

IMPORTANT

Rotate brushroll manually to make sure belt is

not twisted.

BELT (continued)

4.29

Actual model may vary from images shown.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

No comments

Hoover Vacuum Cleaner User Manual Page 13