Hoover U8311900 Owner's Manual download pdf (Page 12)

Using a Phillips screwdriver,

remove the three screws as

shown and lift off lens.

Pull old bulb straight out of socket.

Remove lens

Replace lens

Push new bulb straight into

socket until locked in place. Do

not twist bulb.

Excessive force is not required.

Reposition lens and secure with the

three screws.

Headlight replacement

What to buy

This cleaner uses a T3 1/4 wedge

base bulb, HOOVER part no.

27313107.

Disconnect cleaner from electrical out-

let.

Press on handle release pedal and

lower the nozzle so it is flat. Remove

bag door (Fig. 32).

Align new filter bag collar (B)

with tray (C). Slide bag collar all

the way into tray. The bag collar open-

ing will be sealed to the dirt tube open-

ing.

Tuck in filter bag inside the bag cavity.

Close bag door.

Disconnect cleaner from electrical outlet. Do not use

cleaner without secondary or final filter in place.

The secondary filter, located within the grill (A) in the bottom

of the bag compartment, protects the motor from dirt particles.

If filter becomes dirty, slide grill out and remove filter. Hand

wash filter with mild detergent and cold water. Rinse and let

filter air dry completely before repositioning in grill.

Align grill on tracks and slide in until it snaps into position.

Should you want to replace this filter, ask for HOOVER part

No. 38765031.

Secondary filter

Headlight

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

No comments

Hoover U8311900 Owner's Manual Page 12