®This product was designed foreasy assembly (see page 3)www.hoover.comENGLISH ➜ pp.1-13ESPAÑOL ➜ pág. 14-21FRANÇAIS ➜ p. 23-30Owner’s ManualThank you
103-293. Remove agitator including end plates(C) and discard.4. Inspect belt to ensure that it is ingood condition. If belt is cracked,gouged or broke
113-303-323-31E6. With curved ends down, slide endplates (C) of brush roll into slots (E) ontool.7. Replace belt guard (B) making surenot to pinch bru
12LubricationThe cleaner is equipped with bearingsthat contain sufficient lubrication for thelife of the cleaner. The addition of lubri-cant could cau
13ServiceTo obtain approved HOOVER serviceand genuine HOOVER parts, locate the nearest Hoover Sales and ServiceCenter or Authorized Hoover Warranty Se
2Thank you for choosing a HOOVER product.Please enter the COMPLETE model and serial numbers in the spaces provided. The numbers are located on the bac
31. AssemblyIf you need any assistance:Visit our website at www.hoover.com. Click on the “Service” buttonto find the service outlet nearest you ORCall
41-6 1-71. Handle2. Custom Control™ powerswitch3. Custom Control™indicator4. Tool cover5. Dusting brush6. Pre-filter7. HEPA cartridge filter8. Headlig
5Continued ➜A2-32-42-5Carrying cleanerUse the carrying handle to lift thecleaner.Do not lift cleaner using dirt cup handle (A).Handle positionsThe han
2-11Stair cleaningUse the hose and powered hand tool orfurniture nozzle for stair cleaning. CAUTION: To prevent the cleanerfrom falling, always place
7How to attach toolcoverThe tool cover is designed with a “break-away” feature which allows it to snap free ifit is pushed open too far.To reattach, a
3-13Disconnect cleaner from electricaloutlet.Step on handle release pedal and placecleaner in the lowest position. Turncleaner over. Using a Phillips
9Install bulb - Pull old bulb straight outof socket. Push new bulb straight intosocket until locked in placeExcessive force is not required.Replace h
Comments to this Manuals